Skip to main content

Coverage sizing

How Much Life Insurance Coverage Do You Need? Size It From the Obligations

Buying and cost mechanics · Updated October 18, 2026

Ask a room of buyers how much life insurance coverage they need and most answers start from a payment: a monthly figure they were quoted, a round face amount a seller suggested, or a multiple of salary printed on a workplace form. Each starting point skips the prior question. Coverage exists to settle obligations and replace income for a defined span. The amount follows from those obligations. A payment follows from the amount, the term, your age, and your health class, in that order. Reverse the order and the household ends up with whatever face amount a payment happens to buy, whether or not that amount retires the mortgage, carries the children through dependency, or pays for a funeral.

This guide works in the forward direction only. It sizes the face amount from obligations you can write down: debts to retire, income years to replace, final expenses, and education or dependent care amounts you supply yourself. It then subtracts resources a survivor could already use, namely liquid assets and existing coverage. No step in the method asks what a policy costs. Pricing belongs later, after the amount and the term are set, and it belongs in a comparison of real quotes made for you. If a seller wants to start from a payment and work backward to an amount, ask them to set that sheet aside and work through your obligations first.

Sources and dates: how we check each figure.

The needs method, in one pass

The needs method has five lines. Add the first four, subtract the fifth, and the result is the face amount to shop for.

  1. Debts to retire: the balances a survivor would need to clear so that monthly payments stop competing with a reduced income.
  2. Income years to replace: your annual income multiplied by the number of years your household would need that income replaced.
  3. Final expenses: a funeral and related final costs, sized from published figures or from a written local plan.
  4. Education or dependent care: amounts you choose for schooling, childcare, or support for a dependent who needs care beyond childhood.
  5. Minus resources already in place: liquid assets a survivor could spend, plus existing coverage that will still be in force when it is needed.

Each line gets its own section below, because each line fails in a different way when it is rushed. Debts get understated when a balance is read from memory. Income years get picked from habit rather than from the ages of the people depending on the income. Final expenses get guessed instead of checked against a published source. Existing coverage gets subtracted at full face value even when it ends with a job. Work the lines slowly, with statements and a written funeral plan where you have them, and the total that emerges is a number you can defend line by line to a spouse, an agent, or yourself in five years.

Step 1: debts to retire

List every debt whose payments would strain a survivor budget, with the current balance from the statement rather than from memory. For most households the list starts with a mortgage. Add car loans, student loans you co-signed, personal loans, and revolving balances that carry from month to month. The sizing question for each debt is simple: if this balance were paid in full at your death, which monthly payment disappears from the survivor budget, and does removing it matter? A mortgage payment usually matters more than any other line because housing is the cost a survivor can least reduce on short notice.

Two cautions belong on this line. First, count the balance, not the original loan amount, and not the payoff figure from a refinance offer. Balances fall as you pay, so a sizing done from an old statement overstates the need. Second, do not count a debt twice. If a loan balance is already inside the income replacement line because you plan for the survivor to keep paying it from replaced income, it does not also belong on the debt line. Pick one treatment per debt: retire it at death with the benefit, or carry its payments inside the income years. The double counting section later in this guide returns to this trap, because it inflates more household totals than any other error in the method.

Step 2: income years to replace

Multiply your annual income by the number of years your household would need it replaced. That multiplication is the whole step. You supply both inputs. Use the income your household actually lives on, after you decide whether the figure should be gross pay or the amount that reaches the household accounts. Then choose the years from the obligations themselves: the years until the youngest dependent could support themselves, the years until a spouse could reasonably rebuild earnings after time out of the workforce, or the years until retirement income begins. Different households with the same income will choose different years, and that difference is the method working as intended.

Resist two distortions on this line. The first is replacing income to an age with no connection to dependency. Averages about lifespan do not set the year count. For context only, period life expectancy at birth is 75.8 years for males and 81.1 years for females, with 18.1 years (male) and 20.7 years (female) of expected remaining life at age 65 (Source: U.S. Social Security Administration, Office of the Chief Actuary period life table, 2023, as used in the 2026 Trustees Report). Those figures describe a population in a single year of mortality experience. They describe no individual household, they are not an underwriting prediction, and they say nothing about how long your children need support or when your mortgage ends. Dependency sets the years. Population tables do not.

The second distortion is assuming a survivor needs every dollar of the current income for every year. A household budget changes after a death: work related costs fall, some spending ends, and a spouse may return to work or increase hours over time. Other costs rise, including childcare that a parent previously provided without pay. Some households size this line at full income for the full span. Others size the early years at full income and later years at a reduced level, in two separate multiplications added together. Either shape is defensible if the reasoning is written beside it. A number with no reasoning is hard to revisit and easy to distrust later, so write the years and the basis for them on the same page as the total.

Step 3: final expenses, sized from a published source

Final expenses are the costs that arrive at death regardless of age: a funeral, a burial or cremation, and the small administrative costs around settling an estate. Term coverage bought for income replacement will usually have expired long before this bill arrives at an advanced age, which is why many households treat final expenses as a separate line, and often as a separate small permanent policy. Our funeral cost planning guide builds this budget from a written plan in full. For the sizing method here, published medians give you a grounded starting figure instead of a guess.

The National Funeral Directors Association (NFDA), 2023 Member General Price List Study, puts the national median cost of a funeral with viewing and burial at $8,300 (Source: National Funeral Directors Association (NFDA), 2023 Member General Price List Study). The same study puts the national median cost of a funeral with viewing and cremation at $6,280 (Source: National Funeral Directors Association (NFDA), 2023 Member General Price List Study). Read the exclusions beside those figures before you use either one. The burial median excludes cemetery costs, a monument or grave marker, and cash advance items such as flowers or an obituary. The cremation median includes an alternative cremation container and an urn, and it excludes cemetery costs and cash advance items. A burial plot, a marker, and the items a funeral home pays third parties for on your behalf all sit on top of the median, so a household planning a burial with a plot purchase should size this line above the burial median, using the written price list a funeral home must provide under the FTC Funeral Rule and the cemetery's own written prices, since the rule does not cover cemeteries without an on-site funeral home.

Medians are national midpoints, not local prices and not a ceiling. Regional medians in the same 2023 NFDA study differ from the national figures, and your local written prices govern your plan. Use the medians to keep the line realistic when no local plan exists yet, then replace the median with your own written figures when you have them. What this line should never be is a figure copied from a final expense advertisement, because those figures are chosen to sell a benefit size, not to describe a funeral.

Step 4: education or dependent care amounts you supply

No published table can set this line for you. If supporting a child through a program of study matters to your household, write the amount you intend to provide, per child, and add the amounts together. If a dependent needs care beyond the normal span of childhood, because of a disability or a health condition, write the support amount and the span you are funding, and treat that portion as a longer obligation that may call for a different policy structure than term alone. If young children would need paid childcare so a surviving parent could keep working, that care cost belongs either on this line as a lump amount or inside the income years as an annual cost, and, as with debts, on one line only. New parents can size the extra amount a child adds, with a Social Security offset, in life insurance for new parents.

Households split sharply here. Some fund education in full as a first order obligation. Others fund a defined contribution toward it and expect the child to carry the rest through work or borrowing, as many students already do. Neither position is an error. An error is leaving the line blank by default while telling yourself the benefit will somehow stretch to cover schooling after it has retired a mortgage and replaced a decade of income. If education is in the plan, it needs its own amount, stated in the open, where its effect on the total is visible.

Step 5: subtract liquid assets and existing coverage, with care

The gross need is not the amount to buy. Subtract what a survivor could already spend or claim. Liquid assets means savings and investments that could be reached without selling a home or breaking a retirement account at a penalty: bank savings, taxable investment accounts, and similar holdings, at their current values. Leave the house itself out of this line unless the survivor plan is genuinely to sell it, and leave retirement accounts mostly out as well, because a survivor who spends retirement savings at 45 to replace insurance has traded one shortfall for a later one. Some households subtract a portion of accessible retirement funds with that trade stated plainly. The reasoning matters more than the convention.

Existing coverage subtracts only to the extent it will actually be there. An individually owned policy in force, with a term that reaches the years you are sizing, subtracts at its face amount. Employer group coverage needs a harder look. Group cover is tied to the job: amounts are often set as a salary multiple by the employer, coverage commonly reduces at older ages under the plan schedule, and eligibility usually ends shortly after employment ends, leaving only short portability or conversion windows. A household that subtracts group cover at full face value is assuming the job, the plan, and the amount all survive unchanged until the day the cover is needed. Our employer group life gaps guide works through portability, conversion, and reduction schedules in detail. A prudent planning choice many households make is to subtract group cover at less than face value, or not at all, when sizing individually owned coverage, and to treat any group benefit that does pay as a cushion rather than as a load bearing part of the plan. Whatever treatment you choose, write it beside the line, so a future re-run of the sizing can see the assumption instead of rediscovering it.

The income multiple shortcut, and where it misleads

The shortcut you will meet most often sizes coverage as a multiple of annual income: take the income, multiply by a round number of times, and call the product the amount to buy. Its appeal is speed. One multiplication, no statements, no funeral figures, no debt list. For a first conversation it can at least start a discussion in the right general territory for a household with average debts and young children, because income years are usually the largest line in the needs method too.

The shortcut misleads because it cannot see the differences that decide real household need. Two households can share the same income and need very different face amounts. One carries a large mortgage with many years to run, three young children, a spouse out of the workforce, and no savings. The other has no mortgage, grown children, a working spouse with an income of their own, and savings that could carry the household for years. A single multiple hands both households the same answer. The needs method hands them different answers, because debts, dependent years, and assets enter the calculation. The shortcut also hides final expenses entirely, says nothing about education, and treats existing coverage as if it did not exist. Use a multiple, if you use one at all, as a rough cross check after the needs method: if the multiple and the needs total land near each other, the total has passed a loose sanity test. If they differ widely, trust the line by line total, because you can see what is inside it.

A worked example: one hypothetical household, line by line

The household in this example is a hypothetical illustration only. Every input below is stated so the arithmetic can be checked. The inputs are not averages, not recommendations, and not a description of any real family. The only figure taken from a published source is the final expense line, identified with its source beside it. No premium appears anywhere in this example, because the example sizes an amount. Pricing that amount is a separate step done with real quotes for a real applicant.

LineStated inputArithmeticAmount
Income years to replaceHypothetical annual income of $80,000, replaced for 10 years while children are dependent$80,000 multiplied by 10 years$800,000
Mortgage to retireHypothetical current mortgage balance of $240,000Balance taken from the statement$240,000
Other debts to retireHypothetical car loan and revolving balances totalling $25,000Balances added together$25,000
Final expensesFuneral with viewing and burial at the national median of $8,300 (Source: National Funeral Directors Association (NFDA), 2023 Member General Price List Study)Published median used as the line figure, before any cemetery or marker costs the median excludes$8,300
Education amountHypothetical household contribution of $50,000 toward schooling for their childrenAmount chosen by the household$50,000
Gross needSum of the five lines above$800,000 plus $240,000 plus $25,000 plus $8,300 plus $50,000$1,123,300
Minus liquid savingsHypothetical bank and taxable savings of $30,000 a survivor could spendSubtracted from gross needMinus $30,000
Minus existing owned coverageHypothetical individually owned policy of $100,000 already in force for the years being sizedSubtracted from gross needMinus $100,000
Face amount to shop forGross need minus savings minus existing owned coverage$1,123,300 minus $30,000 minus $100,000$993,300

Read the table for its structure. The income line dominates, as it does in most working households, which is why the year count deserves the longest discussion before any shopping starts. The household in this illustration holds group coverage at work as well, and following the treatment described in Step 5, they subtract none of it in this sizing, because that cover ends if the job ends. They would then shop for a face amount near the $993,300 total, which in practice means looking at a round face amount of $1,000,000 in this hypothetical, rather than reducing the need to fit a payment they had in mind before the arithmetic existed. If any input changes, the total changes with it, line by line. That traceability is the point of the method: a spouse reading this page of figures can challenge the year count, the education amount, or the savings treatment, and the disagreement is about a stated input, not about a slogan.

What not to count, and the double counting traps

A sizing total earns trust as much from what it leaves out as from what it includes. Leave out the value of a home a survivor will keep living in. Leave out retirement accounts earmarked for a survivor in their own old age, except for any portion you deliberately assign with the trade written down. Leave out expected inheritances, which arrive on no schedule you control. Leave out Social Security survivor benefits as a direct subtraction unless you have checked the actual benefit rules for your family configuration, including the earnings limits and the years when no child is young enough for a benefit to be payable to a caregiving spouse. Those benefits are real, but their timing is uneven, and subtracting a smooth assumed amount against a benefit with gaps built into it overstates what a survivor receives in the hardest years.

Then check the traps that count one need twice. The mortgage trap: the balance sits on the debt line to be retired at death, while the income line was built from a budget that still includes the mortgage payment, so the same obligation is funded two ways. The childcare trap: paid care sits inside the income years and again as a lump amount on the education and care line. The final expense trap: a small permanent policy already owned for funeral costs is subtracted as existing coverage, while the full funeral figure also stays in the need lines, which is correct only if the subtraction and the line refer to the same funeral, so verify that they do before treating the result as a shortfall. The group coverage trap runs in the opposite direction: group face value subtracted in full, as if it were owned coverage, understates the need by the amount most likely to vanish before it is used. Work the traps in order, fix each overlap by choosing a single treatment, and the total that remains is the total to take into shopping.

Pair the amount with a term, then price it

An amount without a term is half a specification. The years inside your sizing point to the term: coverage for income and mortgage obligations should last at least as long as the longest of those obligations runs. Our term lengths compared guide sets 10, 20, and 30 year windows side by side, and term length selection math shows how total paid changes with the window using labelled illustrations. Check the conversion options in any policy you consider as well, because the right to turn term cover into permanent cover without new medical underwriting, before a stated deadline, is the bridge if a temporary need later becomes a permanent one, such as support for a dependent who will need care for life.

Only after the amount and term are written down does pricing enter, and it enters as a comparison of quotes made for you, at that amount and that term. Put those real quotes into the quote worksheet and compare total paid over the term and cost per $1,000 of coverage, side by side. The worksheet computes only what you enter. It stores nothing and sends nothing, and it does not provide quotes. If the quotes for the amount you need strain the household budget, the adjustments available are structural and visible: revisit the year count, the education amount, or the debt treatment, and record which input changed and why. Shrinking the face amount silently, to fit a payment, hides exactly the shortfall the sizing was built to expose.

When to re-run the sizing

A sizing is a snapshot of obligations, and obligations move. Re-run the full method, not just a line, when any of these events lands. A new debt, above all a new mortgage or a refinance that restarts a mortgage clock, changes both the debt line and the term the coverage needs to reach. A new child resets the dependency years and may add an education amount. A job change can end group coverage, alter income, and open or close short conversion and portability windows measured in days or weeks, so that re-run should happen promptly rather than at an annual review. A spouse entering or leaving paid work changes both the income to replace and the income that remains. A policy event matters too: an existing policy nearing the end of its term, or a conversion deadline approaching on a policy you own, can change the existing coverage line from an asset into an expiry date. Marriage, divorce, and a dependent developing a long term care need each rewrite more than one line at once. Between events, a re-run every few years catches the quiet drift of falling balances and growing savings, which usually lowers the need over time. Falling need is a normal result, not a sign the earlier sizing was wrong. It is the method tracking a household whose obligations are being paid down as planned.

Education only. This site does not sell insurance and does not provide quotes. Size the amount from your obligations, then take that amount and term to a licensed life insurance agent in your state for quotes made for you.

Readers who are single, with no one relying on their income, can run a shorter version of this method in do you need life insurance if you have no dependents, which tests four obligations instead of the full household list.

Your next step

Your next step

The worked example on this page came to $993,300 to shop for, from its stated inputs: income of $80,000 for 10 years, a $240,000 mortgage, $25,000 of other debts, $8,300 of final expenses, and a $50,000 education amount, minus $30,000 of savings and $100,000 of existing coverage. Run the same list in the coverage need calculator with your own figures, or open the worksheet with those exact need inputs carried over, check the total matches, then replace every input with yours.

Frequently asked questions

Does the amount change if a spouse also works?

Yes, usually. A working spouse brings income that continues after a death, so the household needs fewer years of the other income replaced, or the same years at a lower level. Size each earner separately: for each person, count the income that would actually stop, the debts that remain, and the care costs that person currently covers without pay, such as childcare. A non earning spouse can still need coverage, because replacing unpaid care with paid care is a real cost even though no paycheck stops.

Should coverage replace income to retirement, or for a fixed number of years?

Either frame can work if it matches the dependency underneath it. Replacing to retirement fits a household where a spouse could not rebuild earnings and no other income begins earlier. A fixed number of years fits when children reach independence, a mortgage ends, or a spouse returns to full earnings on a foreseeable date. Write the event that ends the need beside the year count. If no event ends it before retirement, retirement is the end date that matches the facts for the line.

Does existing group coverage subtract dollar for dollar?

Not safely, in most planning. Group coverage is tied to employment, is often set by the employer as a salary multiple, may reduce at older ages under the plan schedule, and usually ends shortly after the job ends, apart from short portability or conversion windows. Subtracting its full face value assumes the job and the plan survive unchanged until the cover is needed. Many households subtract group cover at less than face value, or not at all, when sizing coverage they own, and treat any group benefit that pays as a cushion.

Should final expenses be sized inside this total, or as a separate policy?

The amount belongs inside the total either way, because a funeral is an obligation like any other line. The policy structure is a separate question. Funeral costs arrive whenever death occurs, including at ages long after a term policy bought for income replacement has expired, so many households fund this line with a small permanent policy and fund the income, debt, and education lines with term. Keep the line in the sizing, and choose the structure that will still be in force when the bill arrives.

What if the needs total is larger than the quotes I can manage?

Go back to the inputs, in the open, rather than shrinking the face amount to fit a payment. Revisit the income year count, the education amount, and whether each debt is being retired or carried, and record which input changed and why. A smaller amount chosen by changing a stated assumption is a decision you can explain and revisit. A smaller amount chosen to match a payment hides the shortfall the sizing was built to show.